Windows 10 Every Time I Restart I Have to Press Num Lock Again
Windows 10 has been plagued by tons of unlike problems ever since it was introduced, and for many users – specially users who upgraded to Windows 10 from an older version of the Bone – chief amongst these problems is ane which turns the Num Lock off every time an affected computer shuts down, resulting in the Num Lock not beingness automatically turned on at startup. Where applicative, users affected by this event accept reported that they continued to suffer from this issue fifty-fifty though Num Lock was set up to be turned on at startup in their computer's BIOS.
Working around this problem is pretty easy – all you need to do is printing the Num Lock key on your keyboard once your computer boots up, and the Num Lock will be turned on, but what purpose exercise computers serve us if not our convenience? This problem is non a question of how easily an affected user can piece of work around it but of why affected users are unable to enjoy the small-scale but highly meaning pleasance of having their Num Lock automatically turned on for them when their computer boots upwards.
This problem is a matter of user convenience, making it an outcome of the highest priority. The possible causes for this problem are pretty much all over the board – from Fast Startup to Windows 10 trying to plow the Num Lock on when information technology is already on, resulting in it being turned off, or something completely unrelated. The following are the three nearly effective solutions that have managed to resolve this problem for almost of the Windows ten users who accept been victimized by this trouble in the by:
Solution 1: Disable Fast Startup
Fast Startup is a neat footling feature that was introduced with Windows 8 – a feature that, when a calculator shuts downwards, loads the active Windows kernel and all loaded drivers into the hiberfile (hiberfil.sys: the same file used by the Hibernate option). The next fourth dimension the computer boots upwards, contents of the hiberfile are loaded into the reckoner'due south RAM, finer cutting down the time it takes the computer to kick up past nearly half. However, Fast Startup tin can sometime practice more than impairment than adept equally it not only causes Windows 10 to not unmount its HDD/SSD when shutting down merely is too one of the leading causes of this issue.
Disabling Fast Startup is undoubtedly the most constructive solution capable of fixing this outcome, although information technology results in the loss of the Fast Startup characteristic altogether. To disable Fast Startup, you demand to:
- Right-click on the Get-go Bill of fare button to open the WinX Menu.
- Click on Power Options in the WinX Menu.
- Click on Choose what the power buttons do / Choose what the ability push does in the left pane.
- Click on Change settings that are currently unavailable.
- Most the bottom of the window, uncheck the checkbox beside Plow on fast startup (recommended) to disable Fast Startup.
- Click on Save changes.
- Close the System Settings
- Restart your computer.
- At startup, check to encounter whether or non the Num Lock is turned on when you become to the login screen.
If the steps listed and described higher up fail to disable Fast Startup (which is a pretty unlikely scenario), but correct-click on the Start Menu button to open the WinX Carte du jour, click on Control Prompt (Admin), type the following into the elevated Command Prompt and printing Enter:
powercfg -h off
Once this control has been executed successfully, the hiberfile used by both Hibernate and Fast Startup will be deleted, ultimately disabling both of these features and also freeing up as much disk space on your HDD/SSD equally the amount of RAM that your computer has.
Solution 2: Prepare the problem by tweaking your computer's Registry
If Solution ane doesn't work or if y'all just don't desire to sacrifice Fast Startup to resolve this problem, fearfulness not every bit some other extremely effective resolution to this problem that you can use is to fix the consequence by tweaking sure aspects of your computer's Registry via the Registry Editor. In club to utilize this solution, you need to:
Press the Windows Logo key + R to open a Run
Type regedit into the Run dialog and press Enter to launch the Registry Editor.
In the left pane of the Registry Editor, navigate to the following directory:
HKEY_USERS > .Default > Control Panel
In the left pane of the Registry Editor, click on Keyboard to take the registry key'south contents displayed in the correct pane.
In the right pane, locate and double-click on a registry value named InitialKeyboardIndicators to modify it.
Supplant whatsoever is in the registry value'south Value data field with 2147483648.
Click on OK.
Get out the Registry Editor and restart your computer.
At startup, check to see whether or non the Num Lock is turned on when you get to the login screen.
Notation: If, once your estimator restarts, you lot run into that Num Lock isn't turned on at the login screen, repeat each and every unmarried ane of the steps listed and described above, simply this fourth dimension, when you get to step vi, supervene upon whatever is in the Value data field of the InitialKeyboardIndicators registry value with 2147483650 instead of 2147483648. This has worked for many a Windows 10 user troubled past this problem that weren't able to fix it using the steps listed and described in a higher place, especially users who were experiencing this trouble on HP computers.
Solution 3: Plow the Num Lock off in your estimator's BIOS
A few Windows 10 users affected by this issue have found that the result is acquired because Windows 10 tries to turn Num Lock on, simply since it is already turned on every bit information technology is configured to be in the affected computers' BIOS settings, the issue is the Num Lock being turned on. If this is what is causing this problem in your example, y'all need to simply turn the Num Lock off in your computer's BIOS. In guild to exercise so, you need to:
Close your computer downward.
Boot your computer up.
Boot into your computer's BIOS – instructions for doing and so (the key that needs to be pressed in guild to admission the computer'due south BIOS, to be more precise) can be found on the very first screen that y'all see when your reckoner tries to boot up.
In one case in your computer'south BIOS, search through all of the bachelor tabs for an option that dictates whether or not the Num Lock is to be turned on at startup.
Disable this pick.
Exit the BIOS merely call back to salvage your changes while doing so.
Allow your computer to kicking up, and see whether or not the Num Lock turns on once yous get to the login screen.
Source: https://appuals.com/make-num-lock-stay-startup/
0 Response to "Windows 10 Every Time I Restart I Have to Press Num Lock Again"
Postar um comentário